Adventures in Lumber

For me, my lumber adventures always start early on a Saturday (they close at noon).  The lumberyard I purchase from (The Hardwood Store in Gibsonville NC) is 30 miles away, so when I go I always make sure to get everything I need for a project to avoid another trip.

Bring Stuff:  Here’s a list of things that I bring with me to the lumberyard:

  1. Chalk – this helps when measuring parts onto long boards.
  2. Tape measure – I’ve forgotten to bring this in the past, but my lumberyard has loaners available.
  3. Cheap handplane – To help see the figure in rough boards. This is something that I think am going to start bringing.  My lumberyard skip planes so this isn’t always necessary.
  4. Cut/parts list – This is absolutely necessary unless you plan on over-buying for every thickness that you’ll need.

Picking: Here’s some helpful advice for picking through lumber.  First, let me say that not all lumberyards tolerate picking; some will jump on you.  The lumberyard I go to now (The Hardwood Store) is very tolerant of picking, but be courteous.  I don’t think it’s a good idea to get on the bad side of those that work at the lumberyard so you might want to leave the stack of lumber the way you found it.  Sometimes when I go to the lumberyard the stack of lumber in some bins will look heavily picked through.  All that you might find are the discarded boards from those before you – lots of sapwood, curved, or knotty.   When this happens I’ve found that if you ask politely they’ll bring out a fresh pallet of lumber if they have it available; just ask nicely.  My lumberyard never has a problem with this and the guys that work there are super nice.

Finding figure:  The lumberyard that I go to skip planes all of their lumber.  Skip planing is the process of lightly planing lumber in order to expose the figure; this also helps with grading lumber.  My lumberyard does this and I really like it.  It’s a great way to see what you’re getting.  All of the beauty as well as any sapwood and imperfections are exposed so there are no surprises after you start milling at home.  If your lumberyard doesn’t do this you can bring a cheap handplane or a scraper with you.  Just expose a little bit of the figure with your scraper or handplane, but don’t go nuts in case you don’t buy it (you might want to check if they are ok with this).

“The Hardwood Store” (Gibsonville NC)    lumberyard

4 Responses to “Adventures in Lumber”

  1. Robert Umphres says:

    Good one Brian, I have never heard of skip planning here in So Texas as hardwood lumber store are few and far between. It would help, a lot of mahogany down here is very rough. It comes from Mexico I think. I have not seen as much 8/4 or thicker as I would like to see. I have cut a lot of mesquite locally and I get some thick table leg material that way. We don not get a lot of maple or cherry down here I order that from Steve Wall Lumber. thanks I always enjoy your site.

  2. Alf Bashian says:

    Add to “Bring Stuff”: a spray bottle of water helps to bring out grain and figure without planing or scraping. Can’t imagine any yard would object. Also, a decent straight edge can help if you don’t have a good eyeball on any warp.
    I moved to south Florida a few years ago from NJ and can’t find a decent hardwood supplier down here (Naples). Prices from mail order are totally ridiculous. Be thankful you have options to choose from! I may have to drive a few hours to get anything decent. In that case, how do you transport wood you buy if one does not own a truck?

    • GarageWoodworks says:

      Good point. I’m pretty lucky to have two that are not that far from me. I’ve never tried mail order lumber but I’d agree that the freight can’t be cheap.

      For hauling my lumber I use a trailer that I pull with an SUV.

  3. Ken says:

    All great tips.
    Have not bought rough hardwood yet so thanks for the tip on checking for the figure.

Leave a Reply