|
Pantry Door Storage
#257
(08/01/2025)
A storage system for a pantry door.
|
|
Align Miter Gauge
#256
(05/21/2022)
Align a miter gauge to 90 degrees using a dial indicator.
|
|
A Cherry Bed
#255
(9/29/2021)
I combined all four parts of this build into one, easy to watch, video.
|
|
Level Table Legs
#254
(06/04/2021)
Remove wobble (rock) from anything with four legs using a palm router and a mortising bit.
|
|
Through Tenon Bookcase
#253
(04/30/2021)
I make a through tenon bookcase from cherry.
|
|
Drawer Box Table Combined
#252
(12/15/2020)
I combined all three parts of the drawer box table build into one.
|
|
Wine Hutch (Complete)
#251
(08/15/2020)
I combined all five parts of the wine hutch build into one.
|
|
Moon Frame
#250
(12/13/2019)
I took a photo of the moon several months ago from my property using a telescope. I recently had a print made and it needed a frame. Birds e...
|
|
Build a Modern Hall Table
#249
(11/15/2019)
This project was originally published in 2015 in five videos. I combined all five into one video for convenience here.
|
|
Flatten Your Watestones
#248
(11/08/2019)
Quick and easily flatten waterstones using this method.
|
|
Chamfered Through Tenons
#247
(10/28/2019)
Use a hand plane to crreate chamfers on your through tenons.
|
|
Notched Top Table
#246
(08/23/2019)
A modern looking table with a top that is notched around the legs.
|
|
Laundry Hamper
#245
(07/12/2019)
Features bookmatched panels and curved rails.
|
|
Tiger Maple Cutting Board
#244
(05/24/2019)
A highly figured tiger maple cutting board. I demonstrate template routing using two different bearing bits.
|
|
Can Wax Ruin a Finish
#243
(05/03/2019)
I examined the influence wax has on an oil-based finish application.
|
|
Wine Hutch Build Part 5
#242
(04/19/2019)
The finale of the wine hutch build.
|
|
Wine Hutch Build Part 4
#241
(03/22/2019)
I finish the drawers and the shelves.
|
|
Wine Hutch Build Part 3
#240
(03/09/2019)
I finished the top and the drawer support structure.
|
|
Wine Hutch Build Part 2
#239
(03/01/2019)
In this segment I finish assembling the carcass.
|
|
Wine Hutch Build Part 1
#238
(02/15/2019)
The legs, and rails are dimensioned. The joinery is also completed and a good start is made on the panels.
|
|
Samurai Mantel Clock
#237
(01/18/2019)
A mantel clock from cherry. Plans are available in my store.
|
|
Make a Fishtail Chisel
#236
(11/30/2018)
I made a set of fishtail chisels from a couple of old and cheap Buck Bros chisels.
|
|
Make a Wall Hanging Chisel Rack
#235
(11/16/2018)
I made a chisel rack which also holds my mallet. All conveniently located in the same place.
|
|
45 Degrees at the Table Saw Quickly and Accurately
#234
(10/26/2018)
Use a dial indicaor to align your table saw blade to 45 degrees. Keep the dial indicator plunger as...
|
|
Floating Tenons - Methods and Applications
#233
(09/29/2018)
A tutorial for making and using loose tenon joinery.
|
|
Sliding Dovetail Toggle Clamp
#232
(07/27/2018)
A quick way to make your toggle clamps more versatile.
|
|
Weather Station
#231
(07/13/2018)
Build a weather station. I made this from cherry and walnut.
|
|
How I Made a Lidded Box
#230
(06/29/2018)
A cherry lidded box for my wife.
|
|
Wine Box with Splined Miters
#229
(06/15/2018)
I made a wine box for my Dad's birthday from sapele. These make great gifts!
|
|
Shop Tour - What Works and What Doesn't
#228
(06/08/2018)
Shop Tour 2018
|
|
End Grain Tic Tac Toe Coasters
#227
(05/25/2018)
Coasters from maple and cherry scrap lumber. Easy and fun project.
|
|
Grizzly G0490X Jointer
#226
(05/11/2018)
Grizzly G0490X Jointer - Unboxing, Setup, Alignment and Impressions of my new jointer.
|
|
Double Curve Cutting Board
#225
(05/04/2018)
A cutting board that utilizes a neat curve making technique.
|
|
Modern Drawer Box Table Part 3
#224
(04/20/2018)
I finish the table by completeing the drawer and the drawer box. Finished with General Finishes Arm-R-Seal
|
|
Modern Drawer Box Table Part 2
#223
(04/13/2018)
The base is finished and the drawer box is almost complete.
|
|
Modern Drawer Box Table Part 1
#222
(03/29/2018)
The carcass is dry assembled.
|
|
Ultimate Bird Feeder
#221
(03/16/2018)
A bird feeder with a hinged roof for easy feed loading.
|
|
A Triangle Waste Basket in Cherry
#220
(03/02/2018)
Covers stopped grooves and book matched panels.
|
|
Cherry Chisel Rack
#219
(02/16/2018)
A feature rich chisel rack with through tenons.
|
|
Double Picture Frame
#218
(02/09/2018)
Covers miter joints, blind halflap joints, and splines.
|
|
Revisit the Twin Screw Vise
#217
(01/26/2018)
My old vise did not require a lathe to build.
|
|
Dual Spline and Tenon Jig
#216
(01/12/2018)
Make a slot for splines and cut tenon cheeks all with the same jig.
|
|
Chisel Bevel Angle Jig
#215
(12/21/2017)
Easy to build and very useful.
|
|
A Cherry Bed Part 4
#214
(12/08/2017)
The finale. Bed rail breakdown fastener hardware installation and more.
|
|
A Cherry Bed Part 3
#213
(11/30/2017)
I glue up the headboard and ffotboard. Almost finished!
|
|
Wagner Moisture Meter Review
#212
(11/27/2017)
A review of the Wagner Meter pinless moisture meter. Model MMC220
|
|
A Cherry Bed Part 2
#211
(11/17/2017)
This episode is all about the joinery!
|
|
A Cherry Bed Part 1
#210
(11/10/2017)
I start on a bed for my son and discuss why is old bed is failing. I also show past projects in his room.
|
|
BESSEY Tools IBeam Clamp Review
#209
(11/03/2017)
Review of Bessey Tools IBeam clamp. This is a sponsored video.
|
|
BOSCH Glide Review
#208
(10/30/2017)
Review of the Bosch Glide GCM12SD.
|
|
Open Box Vase
#207
(10/20/2017)
A vase that was supposed to resemble a flower but looks more like a box.
|
|
Shoji Lamp
#206
(10/13/2017)
A shoji lamp made from sapele and rice paper. <a href='/GW_Sketchup.php?show=Shoji_Lamp'>SketchUp File</a>
|
|
Halloween Candy Pumpkin Tray
#205
(09/29/2017)
Made from cherry, and walnut with inlayed ebony eyes.
|
|
Make a Walnut and Maple Box
#204
(09/22/2017)
Walnut and maple box with wrap around walnut grain, splines and book matched maple panel top.
|
|
Rubber Band Cannon
#203
(09/15/2017)
Build a toy cannon that is powered by a rubber band.
|
|
Build a Bathroom Wall Shelf
#202
(09/01/2017)
An easy to build and very useful shelf.
|
|
Open Bookcase Part 3
#201
(08/25/2017)
The finale. Shelves and ledgers.
|
|
Open Bookcase Part 2
#200
(08/18/2017)
In this segment I finish the joinery and glue the carcass together.
|
|
Open Bookcase Part 1
#199
(08/11/2017)
I designed an open -style bookcase, milled all the lumber and started on the joinery.
|
|
Align Jointer Tables Parallel with a Dial Indicator
#198
(08/08/2017)
A fast, easy and inexpensive solution to align a jointer. The tables can be checked for parallel a...
|
|
Picture Frame - Jurassic Edition
#197
(07/21/2017)
My dinosaur Rex makes a few appearances in this one.
|
|
Kitchen Drawer Organizer
#196
(07/07/2017)
I made a couple organizers for our kitchen drawers to replace an older one.
|
|
The Ultimate Bottle Opener
#195
(06/23/2017)
Made from mahogany and finished with polyurethane. This will be given away to a Patreon supporter.
|
|
Modern Desk Part 4 FINALE
#194
(06/16/2017)
I completeed the drawers for the desk and used a recessed drawer pull with walnut.
|
|
Modern Desk Part 3
#193
(06/09/2017)
I completed and attached the drawer boxes.
|
|
Modern Desk Part 2
#192
(06/02/2017)
Build a modern desk with a floating top and suspended drawers.
|
|
Modern Desk Part 1
#191
(05/26/2017)
Build a modern desk with a floating top and suspended drawers.
|
|
Small Parts Sled - Align it Like a Ninja
#190
(05/12/2017)
I made a small parts table saw sled. I aligned it using a dial indicator. I also made my own adjustable runn...
|
|
Build a Headphone Stand
#189
(05/05/2017)
I made a headphone stand for my son for his computer.
|
|
Drill Press Table
#188
(04/21/2017)
I made a plastic laminate covered drill press table with DIY hold-downs.
|
|
Tilting Drill Press Vise
#187
(04/14/2017)
An all wood, tilting drill press vise. Plans are available in my Plans Store.
|
|
Captive Ring Baby Rattle
#186
(04/07/2017)
I made a captive ring baby rattle using a DIY ring releasing tool.
|
|
Drop Leaf Plant Stand Pt 2
#185
(03/31/2017)
I completed the top and the sliding dovetail supports. SketchUp file is available: <a href='/GW_Sketchup.php?show=Drop_Leaf'...
|
|
Drop Leaf Plant Stand Pt 1
#184
(03/24/2017)
I finished the base of the plant stand. Next up is the top including the drop leaves.
|
|
Adjustable Mouth Krenov Plane
#183
(03/17/2017)
Build an adjustable mouth Krenov style plane.
|
|
A Modern Lamp
#182
(03/10/2017)
Build a modern looking lamp with very little wood. <a href = '/GW_Store.php#table_lamp'>Plans</a>
|
|
Panel Bed Part 3
#181
(02/19/2017)
The final segment of my panel bed build series. Thanks for watching. Get $75 off your Leesa mattress with promo code garageworks75 w...
|
|
Panel Bed Part 2
#180
(02/02/2017)
This time I finish the joinery and the panels.
|
|
Panel Bed Part 1
#179
(01/24/2017)
This is Part 1 of my panel bed build. Made from mahogany. I hope you dig it. Mattress: https://www.leesa.com/
|
|
Christmas Ornament
#178
(12/21/2016)
My first Christmas tree ornament made at the lathe.
|
|
Brick Endgrain Cutting Board
#177
(12/09/2016)
A brick end grain cutting board as a Christmas present.
|
|
Police Baton
#176
(11/22/2016)
I made a police baton from walnut and maple. Law Enforcement United: http://www.leunited.org/
|
|
Make a Sewing Box Pt 3
#175
(11/11/2016)
I completed the sewing box.
|
|
Make a Sewing Box Pt2
#174
(10/28/2016)
I finished the box and the lid. Moving on.
|
|
Make a Sewing Box Pt1
#173
(10/21/2016)
Part 1 of the sewing box build.
|
|
Double Floating Tenons
#172
(09/30/2016)
Make double floating mortise and tenon joints with an easy to use fixture.
|
|
Padauk and Oak Bowl
#171
(09/18/2016)
I made my second bowl and I am auctioning it off two a viewer. Bid here: http://www.garagewoodworks.com/auction.php
|
|
Outdoor Table
#170
(09/09/2016)
An outdoor table, foot-rest to go with my Asian Inspired Bench.
|
|
Splined Picture Frame
#169
(08/22/2016)
Cherry picture frame with walnut splines. In loving memory of our dog Puddy.
|
|
Make a Carvers Mallet
#168
(08/01/2016)
A make a carvers mallet with my new Laguna lathe.
|
|
Asian Inspired Bench Part 4
#167
(07/15/2016)
Done! Get the SketchUp file <a href = 'GW_Sketchup_Furniture.php'>here.</a>
|
|
Asian Inspired Bench Part 3
#166
(07/06/2016)
I finished the second of three sub-assemblies. Come back for part 4 (finale).
|
|
Asian Inspired Bench Part 2
#165
(06/27/2016)
I made great progress on my outdoor Asian inspired bench. I finished milling most of the parts. Most of the joinery is comp...
|
|
Asian Style Bench Part 1
#164
(06/14/2016)
This is part 1 of a multi-part series for an Asian inspired sitting bench.
|
|
Router Table Fence Upgrade
#163
(05/28/2016)
I upgraded my router table fence to with a T-track for stops and other accessories.
|
|
A Modern Coat Rack
#162
(05/19/2016)
Build a modern looking coat rack. Coat hanger.
|
|
Cherry and Walnut Wall Shelf
#161
(04/29/2016)
Make a wall shelf with spline reinforced mitered corners.
|
|
Make a Marking Gauge
#160
(04/16/2016)
I made a marking gauge from walnut and cherry scrap. Quick and easy! Hardware: Point: #8-32 x 1.5 inch stainless socket cap scr...
|
|
Cherry Bookcase Part 4
#159
(03/26/2016)
The final video for the series.
|
|
Cherry Bookcase Part 3
#158
(03/20/2016)
In this episode I glue together the carcass and start on the shelves.
|
|
Cherry Bookcase Part 2
#157
(03/09/2016)
This time I finish the joinery and the bookmatched panels.
|
|
Cherry Bookcase Part 1
#156
(02/27/2016)
Build a bookcase along side me.
|
|
G&G Dart Holders
#155
(02/01/2016)
I finally got around to making a dart holder for my Greene and Greene dart board cabinet. Cabinet video: http://www.garagewoodworks.c...
|
|
Ultimate Resaw Fence
#154
(01/17/2016)
Build a resaw fence for your bandsaw. Adjusts for drift. Alignment jigs : http://www.garagewoodworks.com/Alignment.php
|
|
Breakfast Tray Part 2
#153
(01/03/2016)
The final video in the Breakfast Tray series. We make a book-matched panel, glue together the bridle joint, make a proud finger ...
|
|
Breakfast Tray Part1
#152
(12/17/2015)
My wife wanted me to build her a breakfast tray. So , here we go. I designed it in the G&G style with proud bridle joints and eb...
|
|
Sharpen Card Scrapers:A New Method
#151
(11/21/2015)
Sharpen card scrapers using an easy to build jig.
|
|
Lightsaber Candle Holder
#150
(11/08/2015)
Make a set of ligtsaber candle holders.
|
|
Edison Lamp Part 2
#149
(11/02/2015)
A double pendant lamp with spayed legs. This is the final video.
|
|
Edison Lamp Part 1
#148
(10/21/2015)
A double pendant lamp with splayed legs.
|
|
Make a Shop Stool Part 2
#147
(10/02/2015)
Part 2 of 2 of a maple shop stool with splayed legs.
|
|
Make a Shop Stool Part 1
#146
(09/20/2015)
Part 1 of 2 of a maple shop stool with splayed legs.
|
|
End Grain Cutting Board / Grizzly Drum Sander
#145
(09/06/2015)
Make a cool end grain cutting board in a day. This video is a project /tool review style video. The 16"...
|
|
Salad Tongs
#144
(08/23/2015)
Make a set of salad tongs in an afternoon.
|
|
Coin Tray
#143
(08/04/2015)
Make a coin tray using the X-carve from Inventables.
|
|
Align Miter Saw 90
#142
(07/25/2015)
Align your miter saw to 90 degrees with a dial indicator.
|
|
Hall Table Build Part 5
#141
(07/03/2015)
The finale!
|
|
Hall Table Build Part 4
#140
(06/28/2015)
The drawer boxes get assembled and the drawers dovetailed.
|
|
Hall Table Build Part 3
#139
(06/18/2015)
Joinery is finished and the carcass gets assembled.
|
|
Hall Table Build Part 2
#138
(06/13/2015)
This time we finish the table carcass lumber milling and get ready for joinery.
|
|
Hall Table Build Part1
#137
(06/06/2015)
An introduction and a little progress.
|
|
Pencil Holder with INCRA IBOX
#136
(05/31/2015)
Make a pencil holder with box joints using the INCRA IBOX.
|
|
Camera Crane
#135
(05/23/2015)
Build a camera crane to add kick to your videos.
|
|
Make a Trellis
#134
(05/17/2015)
Use a few half lap joints and make a trellis from pine.
|
|
Build a Pizza Cutter
#133
(05/06/2015)
Easy and fun project. All wood pizza cutter.
|
|
Shop Tour 2015
#132
(04/26/2015)
Well, this is a shop tour. Not much else to say here.
|
|
G&G Chime Cover
#131
(04/19/2015)
Make a Greene and Greene chime cover with proud finger joints and ebony plugs.
|
|
Build a Krenov Style Hand Plane
#130
(03/24/2015)
A useful hand plane that can be made in a day.
|
|
Build a Monitor Stand
#129
(03/18/2015)
Works great for dual monitors. Slides out of the way when not in use.
|
|
Curvy Guitar Stand
#128
(02/20/2015)
An easy to make guitar stand with an elegant curve.
|
|
Challenge Coin Holder
#127
(02/08/2015)
Make a challenge coin holder in just a few hours.
|
|
Mortise Fixture
#126
(01/26/2015)
An easy to build mortise fixture for making floating tenon joinery. Also called loose tenon joinery. The plan is available for <a href=...
|
|
Build a Clamp Rack
#125
(1/08/2015)
Build a clamp rack from plywood.
|
|
Ornaments at the DP
#124
(12/08/2014)
Make Christmas tree ornaments at the drill press using a series of rasps.
|
|
Router Bit Storage Part 2
#123
(11/25/2014)
Router bit storage part 2. The carriages and top.
|
|
Router Bit Storage Part 1
#122
(11/14/2014)
Make an easy to build, adjustable, router bit storage cabinet.
|
|
Turn Tool Handles at the Drill Press
#121
(10/28/2014)
Turn tool handles using rasps at the drill press.
|
|
Mortiser Template Copier
#120
(10/17/2014)
Make a template copier addition to your mortiser.
|
|
G&G Desk Part 6
#119
(10/03/2014)
Greene and Greene desk. This time we finish glueing up the top and finish the breadboard ends. Visit Highland Woodworking for the...
|
|
G&G Desk Part 5
#118
(9/19/2014)
I finish the sliding dovetail drawer slides, and the top.
|
|
G&G Desk Part 4
#117
(9/05/2014)
Greene and Greene desk. This time we finish all the drawers.
|
|
G&G Desk Part 3
#116
(8/22/2014)
Greene and Greene desk. This time we finish the glue up of the case and top side support. Visit Highland Woodworking for the <a hr...
|
|
G&G Desk Part 2
#115
(8/07/2014)
Greene and Greene desk. Finished mortising for joinery and created the indent detail and cloud lifts for the rails.
|
|
G&G Desk Part 1
#114
(7/31/2014)
Greene and Greene desk: Lumber prep and a start. <a href=http:/video.php?video=115>Part 2.</a> Get the <a href=http:/GW_Sketchup.php?sh...
|
|
Micro Adjust Your TS Fence
#113
(7/06/2014)
Really easy to build micro adjuster for your TS fence.
|
|
A Scoop from Cherry
#112
(6/18/2014)
An easy to make and very functional scoop.
|
|
Make a Birdhouse
#111
(6/02/2014)
Easy to build birdhouse from cedar.
|
|
Make a Lazy Susan
#109
(5/09/2014)
Made from cherry with a cool walnut and maple curve.
|
|
How to Sharpen Chisels
#108
(4/27/2014)
How I sharpen my chisels. The honing guide and angle gauge were purchased from Lee Valley.
|
|
Make a Desk Organizer
#107
(3/28/2014)
Made from cherry. Finsihed with a mixture of tung oil and varnish.
|
|
Cam Hook Clamp
#106
(3/10/2014)
Cross between a Bernoulli Spiral Clamp and a bench hook. Can easily replace your bench stops.
|
|
Make a Mallet
#105
(2/17/2014)
Made from walnut, maple and BBs. Plan from Shopnotes No2 1992.
|
|
Router Bowl
#104
(2/12/2014)
Make a bowl using a plunge router.
|
|
Dowel Drilling V-Block
#103
(10/31/2013)
Make a V-block for drilling dowels at top dead center.
|
|
Jointer Knife Setting Jig
#102
(10/17/2013)
Magnetic jigs for setting jointer knives. If your knives set too high you can use blue tape on the jig region that extends ov...
|
|
Build a Twin Screw Vise
#101
(10/11/2013)
Easy to build twin screw vise. Get the plans <a href = 'GW_Store.php#vise'>here.</a>
|
|
DIY Bar Clamp
#100
(10/03/2013)
Really easy to build bar clamps.
|
|
Hanging Bird Feeder
#99
(9/20/2013)
Made from poplar and painted a nice shade of red.
|
|
Pin Router Attachment
#98
(9/12/2013)
Turn your router table into a pin router with this easy to build attachment.
|
|
Make a Hanging Hourglass
#94
(8/06/2013)
An interesting way to display an hourglass.
|
|
Make a Table Saw Fence Alignment Jig
#93
(7/25/2013)
Table saw fence alignment is crucial for clean and safe table saw rip cuts. This jig includes an adjustable miter...
|
|
Build a Modern Looking Clock
#92
(7/19/2013)
Made from cherry, spalted maple with walnut inlay.
|
|
Side Table Build-A-Long: Part 3
#91
(6/28/2013)
The final installment for the series. We finish the drawer and top.
|
|
Side Table Build-A-Long: Part 2
#90
(6/21/2013)
In this second part we finish the carcass and glue it together.
|
|
Side Table Build-A-Long: Intro and a Start
#89
(6/14/2013)
First GW build-a-long series. Great for beginners or intermediate woodworkers looking for a fun build.
|
|
Cherry Pencil Holder
#88
(6/7/2013)
Made from cherry and finished with a mixture of tung oil and varnish.
|
|
Pantry Shelves
#87
(5/31/2013)
Made from cherry ply and solid cherry edge banding.
|
|
Make a Few Drink Coasters
#86
(5/24/2013)
Made from cherry and using a DIY circle jig.
|
|
Align Table Saw Blade to 90°
#85
(05/09/2013)
Align your table saw blade to 90 with this easy to build jig. This same jig can also be used to align your fences to ...
|
|
Tilting Router Table Fence: Raised Panels & More
#84
(5/03/2013)
Make raised panels and splined miter joints using a tilting router table fence.
|
|
Tilting Router Table Fence
#83
(4/26/2013)
Make a router table that tilts both forward and back.
|
|
Make a Mancala Game
#82
(4/19/2013)
Made from maple with mahogany and walnut accents.
|
|
Splined Picture Frames
#81
(4/12/2013)
Make a couple picture frames with splined corners
|
|
Maple Lamps Part II
#80
(4/05/2013)
Part 2 of 2 for the maple lamps series.
|
|
Maple Lamps Part I
#79
(3/29/2013)
Make a couple maple lamps with curly maple panels.
|
|
Egg Holder
#78
(3/20/2013)
Make an egg holder for Easter.
|
|
Salt and Pepper Shakers
#77
(3/13/2013)
Make a set of salt and pepper shakers in an afternoon.
|
|
TV Stand Part 3
#76
(3/06/2013)
In this episode we finish the tv stand and put it to use.
|
|
TV Stand Part 2
#75
(2/27/2013)
Drawers and guides!
|
|
TV Stand Part 1
#74
(2/20/2013)
Build a TV stand with me from cherry with exposed drawer sides. Part 1
|
|
Make some chopsticks
#73
(2/13/2013)
Made from cherry and walnut.
|
|
Sanding Block
#72
(2/06/2013)
Make an easy to build sanding block
|
|
Bagel Slicer
#71
(1/30/2013)
Make a bagel slicer that is easy and fun to build.
|
|
Bandsaw Template Jig
#70
(1/19/2013)
Make a bandsaw template jig.
|
|
Taper Jig
#69
(1/14/2013)
Build a tapering jig for the table saw.
|
|
Walnut Trash Can
#68
(1/07/2013)
Make a walnut trash can with book matched tapered sides.
|
|
Push Stick Modification
#67
(12/16/2012)
If a metal screw makes you uncomfortable then tap for a nylon screw.
|
|
Candle Holder
#66
(12/11/2012)
Make a candle holder from cherry.
|
|
Bottle Opener
#65
(12/02/2012)
Make a neat bottle opener.
|
|
Nut Cracker
#64
(11/24/2012)
A walnut nut cracker.
|
|
Cam Style Clamp Rack
#63
(11/18/2012)
Make an easy to build cam style clamp rack.
|
|
Sushi Plate
#62
(11/10/2012)
Make a sushi plate from cherry and walnut.
|
|
Adjustable Miter Bar
#61
(11/2/2012)
Make an adjustable miter bar that is immune to humidity changes.
|
|
Bandsaw Blade Tension Gauge
#60
(10/28/2012)
Make a bandsaw blade tension gauge.
|
|
Woodworking Safety
#59
(10/21/2012)
A Holloween woodworking safety video. A few woodworking safty rules to follow.
|
|
Build a small table saw sled
#58
(10/14/2012)
Build a small table saw sled and align it accurately.
|
|
A Groovy Band Saw Insert
#57
(9/21/2012)
Make a band saw insert from scrap lumber.
|
|
Raised Dog Feeder
#56
(9/19/2012)
Build a raised dog feeder from cherry. I used cocobolo for the wedges.
|
|
Capture Blade Angles
#55
(9/3/2012)
Accurately capture table saw blade angles. For better accuracy, make a sharpie mark on your blade and re-measure from the same spo...
|
|
Miter Stop
#54
(8/22/2012)
Make a miter stop.
|
|
Half-lapped Dovetailed Picture Frame
#53
(8/9/2012)
Make a half-lapped dovetailed picture frame.
|
|
Riving Knives and Splitters
#52
(7/29/2012)
How to check the alignment of riving knives and splitters.
|
|
You've Been Framed
#51
(7/20/2012)
You've Been Framed - A woodworking contest.
|
|
Curvy Cutting Board
#50
(7/16/2012)
Make a cool curvy cutting board.
|
|
Sneaky Tools
#49
(7/8/2012)
Ever wonder what happens to your lost tools?
|
|
How to sharpen your card scrapers
#48
(6/27/2012)
How to sharpen your card scrapers.
|
|
Peg Game
#47
(5/27/2012)
Make a cool peg game from scraps.
|
|
Cleaning Tenons to Width
#46
(5/10/2012)
Clean-up tenons to width at the router table. Error at 2:16 is 12 thou not 1 as stated.
|
|
Woodpeckers PRL V2
#45
(5/4/2012)
Woodpeckers Precision Router Lift V2 Review.
|
|
Circle Jig 2.0
#44
(4/19/2012)
Make a cool circle cutting jig.
|
|
Shop Tour 2012
#43
(4/08/2012)
A fun tour of my shop taken in 2012.
|
|
Kerf Making Jig
#42
(4/03/2012)
A jig for making tight fitting dados. Quick and easy to build.
|
|
The Candle Holder
#41
(3/22/2012)
A neat re-build of an antique candle holder with a mirror backing.
|
|
5-Cut Method Showdown
#40
(3/08/2012)
A comparison of the 5-cut (five cut) method and dial indicator method.
|
|
Bernoulli Spiral Clamp
#39
(2/19/2012)
Introducing the Bernoulli Shell Clamp.
|
|
Step Stool part II
#38
(2/18/2012)
Build a cherry step stool (part II).
|
|
Step Stool part I
#37
(2/10/2012)
Build a cherry step stool (part I).
|
|
Coat Rack part II
#36
(1/28/2012)
Build a wall hanging coat rack (part II).
|
|
Coat Rack
#35
(1/23/2012)
Build a wall hanging coat rack (part I).
|
|
Knife Sharpen Jig Build
#34
(11/08/2011)
Build a planer and jointer knife sharpening jig.
|
|
Bookcase Recap
#33
(7/15/2011)
An entertaining video recap of the bookcase build.
|
|
TS Sled Alignment
#32
(7/05/2011)
How to align a table saw sled fence.
|
|
Bookcase PartVI
#31
(6/25/2011)
Part VI of Cherry Bookcase.
|
|
Bookcase PartV
#30
(6/10/2011)
Part V of Cherry Bookcase.
|
|
Bookcase PartIV
#29
(5/23/2011)
Part IV of Cherry Bookcase.
|
|
Bookcase PartIII
#28
(5/14/2011)
Part III of Cherry Bookcase. Joinery.
|
|
Bookcase PartII
#27
(5/09/2011)
Part II of Cherry Bookcase.
|
|
Bookcase PartI
#26
(5/01/2011)
Part I of Cherry Bookcase. In this video I demonstarte how I transform a 12/4 cherry slab into posts for a bookcase.
|
|
Toy Top
#25
(2/27/2011)
Make a wooden top (toy).
|
|
Transfer Angles
#24
(1/30/2011)
Transfer angles between your table saw blade and your jointer fence.
|
|
Circle Cutting Jig
#23
(12/19/2010)
Make a circle cutting jig for the bandsaw.
|
|
Chisel Plane (DIY)
#22
(11/29/2010)
Make a chisel plane that can be used as a shoulder plane or rabbeting plane.
|
|
Greene and Greene Frame 2
#21
(11/21/2010)
Part 2 of the Greene and Greene inspired picture frame.
|
|
Greene and Greene Frame 1
#20
(11/18/2010)
Part 1 of the Greene and Greene inspired picture frame.
|
|
Micro Adjust Your Fence
#19
(10/31/2010)
Demonstration on using a dial indicator to micro adjust your TS fence.
|
|
Chime Cover Part II
#18
(10/18/2010)
In this episode I finish the chime cover (doorbell).
|
|
Chime Cover Part I
#17
(10/16/2010)
In this episode I build a chime cover (doorbell) from cherry and walnut.
|
|
Horizontal Mortiser
#16
(10/11/2010)
Demonstration of my horizontal mortiser. Great for slot and groove creation. Get the plans <a href = 'GW_Store.php'>here.</a>
|
|
Table Saw Alignment
#15
(9/16/2010)
A quick method for finding and fixing table saw alignment problems. Just in case your miter slots are not parallel with each other,...
|
|
Flush Trim Saw Maintenance
#14
(8/26/2010)
Have you ever noticed that over time your flush trim saws begin to not behave very well? With repeated use the teeth can beg...
|
|
Sharpen Jointer Knives
#13
(5/01/10)
Process for sharpening jointer knives - scary sharp. You can hone the back side of the knife on the sandpaper to remove any bur...
|
|
G&G Indent Detail
#12
(4/17/10)
Process for creating Greene and Greene indent details.
|
|
Mitered Half-Laps
#11
(3/27/10)
Creating mitered half-laps.
|
|
Setting Jointer Knives
#10
(3/13/10)
A quick method for setting jointer knives.
|
|
Square a Miter Gauge
#9
(2/20/10)
An accurate method for squaring a miter gauge or a table saw sled. If you want, keep fine tuning the gauge until the needle has ev...
|
|
Thin Molding
#8
(1/24/10)
A safe method for creating thin molding at the router table. It might be better to index off of a clamped-down scrap piece of wood if you ...
|
|
Prepare Rough Lumber
#7
(1/16/10)
When you rip to final width, be sure to have the face jointed side down.
|
|
Floating Tenons
#6
(12/29/09)
How to make floating tenons. These are also called loose tenons.
|
|
Face Jointing Wide Boards
#5
(12/13/09)
How to face joint wide boards using a jointer and a hand plane.
|
|
Stopped Tapered Flutes
#4
(12/4/09)
An easy method for making stopped tapered flutes.
|
|
Shop Tour 2009
#3
(11/22/09)
Take a tour of my woodshop (2009).
|
|
Planer and Jointer Sharpening Jig
#2
(11/7/09)
This is the old version.
|
|
Table Saw Blade Alignment
#1
(11/4/09)
How to align your table saw blade using a dial indicator and a quality square.
|
