|
45 Degrees at the Table Saw Quickly and Accurately
#234
(10/26/2018)
Use a dial indicaor to align your table saw blade to 45 degrees. Keep the dial indicator plunger as...
|
|
Floating Tenons - Methods and Applications
#233
(09/29/2018)
A tutorial for making and using loose tenon joinery.
|
|
Sliding Dovetail Toggle Clamp
#232
(07/27/2018)
A quick way to make your toggle clamps more versatile.
|
|
Dual Spline and Tenon Jig
#216
(01/12/2018)
Make a slot for splines and cut tenon cheeks all with the same jig.
|
|
Chisel Bevel Angle Jig
#215
(12/21/2017)
Easy to build and very useful.
|
|
Small Parts Sled - Align it Like a Ninja
#190
(05/12/2017)
I made a small parts table saw sled. I aligned it using a dial indicator. I also made my own adjustable runn...
|
|
Drill Press Table
#188
(04/21/2017)
I made a plastic laminate covered drill press table with DIY hold-downs.
|
|
Tilting Drill Press Vise
#187
(04/14/2017)
An all wood, tilting drill press vise. Plans are available in my Plans Store.
|
|
Router Table Fence Upgrade
#163
(05/28/2016)
I upgraded my router table fence to with a T-track for stops and other accessories.
|
|
Make a Marking Gauge
#160
(04/16/2016)
I made a marking gauge from walnut and cherry scrap. Quick and easy! Hardware: Point: #8-32 x 1.5 inch stainless socket cap scr...
|
|
Ultimate Resaw Fence
#154
(01/17/2016)
Build a resaw fence for your bandsaw. Adjusts for drift. Alignment jigs : http://www.garagewoodworks.com/Alignment.php
|
|
Sharpen Card Scrapers:A New Method
#151
(11/21/2015)
Sharpen card scrapers using an easy to build jig.
|
|
Align Miter Saw 90
#142
(07/25/2015)
Align your miter saw to 90 degrees with a dial indicator.
|
|
Mortise Fixture
#126
(01/26/2015)
An easy to build mortise fixture for making floating tenon joinery. Also called loose tenon joinery. The plan is available for <a href=...
|
|
Mortiser Template Copier
#120
(10/17/2014)
Make a template copier addition to your mortiser.
|
|
Micro Adjust Your TS Fence
#113
(7/06/2014)
Really easy to build micro adjuster for your TS fence.
|
|
Cam Hook Clamp
#106
(3/10/2014)
Cross between a Bernoulli Spiral Clamp and a bench hook. Can easily replace your bench stops.
|
|
Dowel Drilling V-Block
#103
(10/31/2013)
Make a V-block for drilling dowels at top dead center.
|
|
Jointer Knife Setting Jig
#102
(10/17/2013)
Magnetic jigs for setting jointer knives. If your knives set too high you can use blue tape on the jig region that extends ov...
|
|
Build a Twin Screw Vise
#101
(10/11/2013)
Easy to build twin screw vise. Get the plans <a href = 'GW_Store.php#vise'>here.</a>
|
|
DIY Bar Clamp
#100
(10/03/2013)
Really easy to build bar clamps.
|
|
Pin Router Attachment
#98
(9/12/2013)
Turn your router table into a pin router with this easy to build attachment.
|
|
Make a Table Saw Fence Alignment Jig
#93
(7/25/2013)
Table saw fence alignment is crucial for clean and safe table saw rip cuts. This jig includes an adjustable miter...
|
|
Align Table Saw Blade to 90°
#85
(05/09/2013)
Align your table saw blade to 90 with this easy to build jig. This same jig can also be used to align your fences to ...
|
|
Tilting Router Table Fence: Raised Panels & More
#84
(5/03/2013)
Make raised panels and splined miter joints using a tilting router table fence.
|
|
Tilting Router Table Fence
#83
(4/26/2013)
Make a router table that tilts both forward and back.
|
|
Bandsaw Template Jig
#70
(1/19/2013)
Make a bandsaw template jig.
|
|
Taper Jig
#69
(1/14/2013)
Build a tapering jig for the table saw.
|
|
Adjustable Miter Bar
#61
(11/2/2012)
Make an adjustable miter bar that is immune to humidity changes.
|
|
Bandsaw Blade Tension Gauge
#60
(10/28/2012)
Make a bandsaw blade tension gauge.
|
|
Capture Blade Angles
#55
(9/3/2012)
Accurately capture table saw blade angles. For better accuracy, make a sharpie mark on your blade and re-measure from the same spo...
|
|
Miter Stop
#54
(8/22/2012)
Make a miter stop.
|
|
Cleaning Tenons to Width
#46
(5/10/2012)
Clean-up tenons to width at the router table. Error at 2:16 is 12 thou not 1 as stated.
|
|
Circle Jig 2.0
#44
(4/19/2012)
Make a cool circle cutting jig.
|
|
Kerf Making Jig
#42
(4/03/2012)
A jig for making tight fitting dados. Quick and easy to build.
|
|
Bernoulli Spiral Clamp
#39
(2/19/2012)
Introducing the Bernoulli Shell Clamp.
|
|
Knife Sharpen Jig Build
#34
(11/08/2011)
Build a planer and jointer knife sharpening jig.
|
|
Transfer Angles
#24
(1/30/2011)
Transfer angles between your table saw blade and your jointer fence.
|
|
Circle Cutting Jig
#23
(12/19/2010)
Make a circle cutting jig for the bandsaw.
|
|
Chisel Plane (DIY)
#22
(11/29/2010)
Make a chisel plane that can be used as a shoulder plane or rabbeting plane.
|
