 |
45 Degrees at the Table Saw Quickly and Accurately #234 (10/26/2018) Use a dial indicaor to align your table saw blade to 45 degrees. Keep the dial indicator plunger as... |
 |
Floating Tenons - Methods and Applications #233 (09/29/2018) A tutorial for making and using loose tenon joinery. |
 |
Sliding Dovetail Toggle Clamp #232 (07/27/2018) A quick way to make your toggle clamps more versatile. |
 |
Dual Spline and Tenon Jig #216 (01/12/2018) Make a slot for splines and cut tenon cheeks all with the same jig. |
 |
Chisel Bevel Angle Jig #215 (12/21/2017) Easy to build and very useful.
|
 |
Small Parts Sled - Align it Like a Ninja #190 (05/12/2017) I made a small parts table saw sled. I aligned it using a dial indicator. I also made my own adjustable runn... |
 |
Drill Press Table #188 (04/21/2017) I made a plastic laminate covered drill press table with DIY hold-downs. |
 |
Tilting Drill Press Vise #187 (04/14/2017) An all wood, tilting drill press vise. Plans are available in my Plans Store. |
 |
Router Table Fence Upgrade #163 (05/28/2016) I upgraded my router table fence to with a T-track for stops and other accessories. |
 |
Make a Marking Gauge #160 (04/16/2016) I made a marking gauge from walnut and cherry scrap. Quick and easy! Hardware: Point: #8-32 x 1.5 inch stainless socket cap scr... |
 |
Ultimate Resaw Fence #154 (01/17/2016) Build a resaw fence for your bandsaw. Adjusts for drift. Alignment jigs : http://www.garagewoodworks.com/Alignment.php |
 |
Sharpen Card Scrapers:A New Method #151 (11/21/2015) Sharpen card scrapers using an easy to build jig. |
 |
Align Miter Saw 90 #142 (07/25/2015) Align your miter saw to 90 degrees with a dial indicator. |
 |
Mortise Fixture #126 (01/26/2015) An easy to build mortise fixture for making floating tenon joinery. Also called loose tenon joinery. The plan is available for |
 |
Mortiser Template Copier #120 (10/17/2014) Make a template copier addition to your mortiser. |
 |
Micro Adjust Your TS Fence #113 (7/06/2014) Really easy to build micro adjuster for your TS fence. |
 |
Cam Hook Clamp #106 (3/10/2014) Cross between a Bernoulli Spiral Clamp and a bench hook. Can easily replace your bench stops. |
 |
Dowel Drilling V-Block #103 (10/31/2013) Make a V-block for drilling dowels at top dead center. |
 |
Jointer Knife Setting Jig #102 (10/17/2013) Magnetic jigs for setting jointer knives. If your knives set too high you can use blue tape on the jig region that extends ov... |
 |
Build a Twin Screw Vise #101 (10/11/2013) Easy to build twin screw vise. Get the plans here. |
 |
DIY Bar Clamp #100 (10/03/2013) Really easy to build bar clamps. |
 |
Pin Router Attachment #98 (9/12/2013) Turn your router table into a pin router with this easy to build attachment. |
 |
Make a Table Saw Fence Alignment Jig #93 (7/25/2013) Table saw fence alignment is crucial for clean and safe table saw rip cuts. This jig includes an adjustable miter... |
 |
Align Table Saw Blade to 90° #85 (05/09/2013) Align your table saw blade to 90 with this easy to build jig. This same jig can also be used to align your fences to ... |
 |
Tilting Router Table Fence: Raised Panels & More #84 (5/03/2013) Make raised panels and splined miter joints using a tilting router table fence. |
 |
Tilting Router Table Fence #83 (4/26/2013) Make a router table that tilts both forward and back. |
 |
Bandsaw Template Jig #70 (1/19/2013) Make a bandsaw template jig. |
 |
Taper Jig #69 (1/14/2013) Build a tapering jig for the table saw. |
 |
Adjustable Miter Bar #61 (11/2/2012) Make an adjustable miter bar that is immune to humidity changes. |
 |
Bandsaw Blade Tension Gauge #60 (10/28/2012) Make a bandsaw blade tension gauge. |
 |
Capture Blade Angles #55 (9/3/2012) Accurately capture table saw blade angles. For better accuracy, make a sharpie mark on your blade and re-measure from the same spo... |
 |
Miter Stop #54 (8/22/2012) Make a miter stop. |
 |
Cleaning Tenons to Width #46 (5/10/2012) Clean-up tenons to width at the router table. Error at 2:16 is 12 thou not 1 as stated. |
 |
Circle Jig 2.0 #44 (4/19/2012) Make a cool circle cutting jig. |
 |
Kerf Making Jig #42 (4/03/2012) A jig for making tight fitting dados. Quick and easy to build. |
 |
Bernoulli Spiral Clamp #39 (2/19/2012) Introducing the Bernoulli Shell Clamp. |
 |
Knife Sharpen Jig Build #34 (11/08/2011) Build a planer and jointer knife sharpening jig. |
 |
Transfer Angles #24 (1/30/2011) Transfer angles between your table saw blade and your jointer fence. |
 |
Circle Cutting Jig #23 (12/19/2010) Make a circle cutting jig for the bandsaw. |
 |
Chisel Plane (DIY) #22 (11/29/2010) Make a chisel plane that can be used as a shoulder plane or rabbeting plane. |
