Video

	Wine Hutch Build Part 5 #242 (04/19/2019) The finale of the wine hutch build.
	Wine Hutch Build Part 4 #241 (03/22/2019) I finish the drawers and the shelves.
	Wine Hutch Build Part 3 #240 (03/09/2019) I finished the top and the drawer support structure.
	Wine Hutch Build Part 2 #239 (03/01/2019) In this segment I finish assembling the carcass.
	Wine Hutch Build Part 1 #238 (02/15/2019) The legs, and rails are dimensioned. The joinery is also completed and a good start is made on the panels.
	Modern Drawer Box Table Part 3 #224 (04/20/2018) I finish the table by completeing the drawer and the drawer box. Finished with General Finishes Arm-R-Seal
	Modern Drawer Box Table Part 2 #223 (04/13/2018) The base is finished and the drawer box is almost complete.
	Modern Drawer Box Table Part 1 #222 (03/29/2018) The carcass is dry assembled.
	A Cherry Bed Part 4 #214 (12/08/2017) The finale. Bed rail breakdown fastener hardware installation and more.
	A Cherry Bed Part 3 #213 (11/30/2017) I glue up the headboard and ffotboard. Almost finished!
	A Cherry Bed Part 2 #211 (11/17/2017) This episode is all about the joinery!
	A Cherry Bed Part 1 #210 (11/10/2017) I start on a bed for my son and discuss why is old bed is failing. I also show past projects in his room.
	Open Bookcase Part 3 #201 (08/25/2017) The finale. Shelves and ledgers.
	Open Bookcase Part 2 #200 (08/18/2017) In this segment I finish the joinery and glue the carcass together.
	Open Bookcase Part 1 #199 (08/11/2017) I designed an open -style bookcase, milled all the lumber and started on the joinery.
	Modern Desk Part 4 FINALE #194 (06/16/2017) I completeed the drawers for the desk and used a recessed drawer pull with walnut.
	Modern Desk Part 3 #193 (06/09/2017) I completed and attached the drawer boxes.
	Modern Desk Part 2 #192 (06/02/2017) Build a modern desk with a floating top and suspended drawers.
	Modern Desk Part 1 #191 (05/26/2017) Build a modern desk with a floating top and suspended drawers.
	Drop Leaf Plant Stand Pt 2 #185 (03/31/2017) I completed the top and the sliding dovetail supports. SketchUp file is available:
	Drop Leaf Plant Stand Pt 1 #184 (03/24/2017) I finished the base of the plant stand. Next up is the top including the drop leaves.
	Panel Bed Part 3 #181 (02/19/2017) The final segment of my panel bed build series. Thanks for watching. Get $75 off your Leesa mattress with promo code garageworks75 w...
	Panel Bed Part 2 #180 (02/02/2017) This time I finish the joinery and the panels.
	Panel Bed Part 1 #179 (01/24/2017) This is Part 1 of my panel bed build. Made from mahogany. I hope you dig it. Mattress: https://www.leesa.com/
	Make a Sewing Box Pt 3 #175 (11/11/2016) I completed the sewing box.
	Make a Sewing Box Pt2 #174 (10/28/2016) I finished the box and the lid. Moving on.
	Make a Sewing Box Pt1 #173 (10/21/2016) Part 1 of the sewing box build.
	Asian Inspired Bench Part 4 #167 (07/15/2016) Done! Get the SketchUp file here.
	Asian Inspired Bench Part 3 #166 (07/06/2016) I finished the second of three sub-assemblies. Come back for part 4 (finale).
	Asian Inspired Bench Part 2 #165 (06/27/2016) I made great progress on my outdoor Asian inspired bench. I finished milling most of the parts. Most of the joinery is comp...
	Asian Style Bench Part 1 #164 (06/14/2016) This is part 1 of a multi-part series for an Asian inspired sitting bench.
	Cherry Bookcase Part 4 #159 (03/26/2016) The final video for the series.
	Cherry Bookcase Part 3 #158 (03/20/2016) In this episode I glue together the carcass and start on the shelves.
	Cherry Bookcase Part 2 #157 (03/09/2016) This time I finish the joinery and the bookmatched panels.
	Cherry Bookcase Part 1 #156 (02/27/2016) Build a bookcase along side me.
	Breakfast Tray Part 2 #153 (01/03/2016) The final video in the Breakfast Tray series. We make a book-matched panel, glue together the bridle joint, make a proud finger ...
	Breakfast Tray Part1 #152 (12/17/2015) My wife wanted me to build her a breakfast tray. So , here we go. I designed it in the G&G style with proud bridle joints and eb...
	Edison Lamp Part 2 #149 (11/02/2015) A double pendant lamp with spayed legs. This is the final video.
	Edison Lamp Part 1 #148 (10/21/2015) A double pendant lamp with splayed legs.
	Make a Shop Stool Part 2 #147 (10/02/2015) Part 2 of 2 of a maple shop stool with splayed legs.
	Make a Shop Stool Part 1 #146 (09/20/2015) Part 1 of 2 of a maple shop stool with splayed legs.
	Hall Table Build Part 5 #141 (07/03/2015) The finale!
	Hall Table Build Part 4 #140 (06/28/2015) The drawer boxes get assembled and the drawers dovetailed.
	Hall Table Build Part 3 #139 (06/18/2015) Joinery is finished and the carcass gets assembled.
	Hall Table Build Part 2 #138 (06/13/2015) This time we finish the table carcass lumber milling and get ready for joinery.
	Hall Table Build Part1 #137 (06/06/2015) An introduction and a little progress.
	Router Bit Storage Part 2 #123 (11/25/2014) Router bit storage part 2. The carriages and top.
	Router Bit Storage Part 1 #122 (11/14/2014) Make an easy to build, adjustable, router bit storage cabinet.
	G&G Desk Part 6 #119 (10/03/2014) Greene and Greene desk. This time we finish glueing up the top and finish the breadboard ends. Visit Highland Woodworking for the...
	G&G Desk Part 5 #118 (9/19/2014) I finish the sliding dovetail drawer slides, and the top.
	G&G Desk Part 4 #117 (9/05/2014) Greene and Greene desk. This time we finish all the drawers.
	G&G Desk Part 3 #116 (8/22/2014) Greene and Greene desk. This time we finish the glue up of the case and top side support. Visit Highland Woodworking for the
	G&G Desk Part 2 #115 (8/07/2014) Greene and Greene desk. Finished mortising for joinery and created the indent detail and cloud lifts for the rails.
	G&G Desk Part 1 #114 (7/31/2014) Greene and Greene desk: Lumber prep and a start. Part 2. Get the
	Side Table Build-A-Long: Part 3 #91 (6/28/2013) The final installment for the series. We finish the drawer and top.
	Side Table Build-A-Long: Part 2 #90 (6/21/2013) In this second part we finish the carcass and glue it together.
	Side Table Build-A-Long: Intro and a Start #89 (6/14/2013) First GW build-a-long series. Great for beginners or intermediate woodworkers looking for a fun build.
	Maple Lamps Part II #80 (4/05/2013) Part 2 of 2 for the maple lamps series.
	Maple Lamps Part I #79 (3/29/2013) Make a couple maple lamps with curly maple panels.
	TV Stand Part 3 #76 (3/06/2013) In this episode we finish the tv stand and put it to use.
	TV Stand Part 2 #75 (2/27/2013) Drawers and guides!
	TV Stand Part 1 #74 (2/20/2013) Build a TV stand with me from cherry with exposed drawer sides. Part 1
	Step Stool part II #38 (2/18/2012) Build a cherry step stool (part II).
	Step Stool part I #37 (2/10/2012) Build a cherry step stool (part I).
	Coat Rack part II #36 (1/28/2012) Build a wall hanging coat rack (part II).
	Coat Rack #35 (1/23/2012) Build a wall hanging coat rack (part I).
	Bookcase Recap #33 (7/15/2011) An entertaining video recap of the bookcase build.
	Bookcase PartVI #31 (6/25/2011) Part VI of Cherry Bookcase.
	Bookcase PartV #30 (6/10/2011) Part V of Cherry Bookcase.
	Bookcase PartIV #29 (5/23/2011) Part IV of Cherry Bookcase.
	Bookcase PartIII #28 (5/14/2011) Part III of Cherry Bookcase. Joinery.
	Bookcase PartII #27 (5/09/2011) Part II of Cherry Bookcase.
	Bookcase PartI #26 (5/01/2011) Part I of Cherry Bookcase. In this video I demonstarte how I transform a 12/4 cherry slab into posts for a bookcase.
	Greene and Greene Frame 2 #21 (11/21/2010) Part 2 of the Greene and Greene inspired picture frame.
	Greene and Greene Frame 1 #20 (11/18/2010) Part 1 of the Greene and Greene inspired picture frame.
	Chime Cover Part II #18 (10/18/2010) In this episode I finish the chime cover (doorbell).
	Chime Cover Part I #17 (10/16/2010) In this episode I build a chime cover (doorbell) from cherry and walnut.